Price might be adjusted if any of your provided information is not correct or incomplete. We will contact you to confirm details and finalize your estimate.
In case of any disagreement all deposits will be refunded. Please leave your email above and our contractor will get back to you within 2 hours.
You can contact us anytime by email: email@example.com or phone (818)588-4445.Thank you for taking us into consideration!!!
We are available and open to schedule a meeting with you to discuss everything in person . We value your input and would like to ensure that we allocate a dedicated time to address your needs.
To schedule a meeting at your convenience. We can accommodate both in-person and virtual meetings, depending on your preference. You can input your email. We will contact you for meeting date and time, or you can utilize our online scheduling tool by visiting our Client Dashboard to select a suitable time slot that works best for you.
We are CA licensed and bonded.Thank you for taking us into consideration!!!
Start by choosing a reference point, such as one wall of the bathroom.
Measure the distance between the two parallel walls that form the width of the bathroom. Take note of the measurement in inches.
Select one wall of the bathroom as a starting point.
Measure the distance from that wall to the opposite wall, which determines the length of the bathroom.
Record the measurement in the inches.
Use a measuring tape or ruler to measure the height of the bathroom walls.
Start at the floor and measure up to the ceiling or any desired reference point.
Note down the measurement in the appropriate unit.
Remember to measure each dimension accurately, and consider any irregularities or protrusions that may affect the measurements. Additionally, it's always a good idea to double-check your measurements for accuracy.
If you need further assistance or have any specific questions regarding your bathroom, feel free to call us!
To measure the length of a backsplash, you will need a measuring tape or ruler. Follow these steps:
1. Clear the area: Remove any items or debris from the backsplash area to get a clear measurement.
2. Start at one end: Choose a starting point, usually at one edge of the backsplash.
3. Measure to the other end: Using a measuring tape or ruler, extend it along the length of the backsplash until you reach the opposite end.
4. Read the measurement: Take note of the measurement in inches.
5. Repeat if necessary: If your backsplash has multiple sections or angles, measure each section separately and add up the measurements to get the total length.
By following these steps, you will be able to accurately measure the length of your backsplash.
Enter final measurement in Length section.
Measuring a kitchen floor is a relatively straightforward process.
Begin by gathering the necessary tools such as a tape measure, level,
and other measuring instruments. Then clear any furniture, appliances,
and other obstructions from the area you are measuring.
Using the tape measure, take horizontal measurements along each wall to determine the length and width of the room. Record these measurements. Take diagonal measurements as well so that you can double-check for accuracy.
Use the level to ensure that all walls are straight and even. Take note of any irregularities such as sloping floors or uneven ceilings in order to plan for adjustments accordingly during installation or renovation.
Mark off the room into sections with masking tape so that you can easily calculate square footage by simply multiplying length by width per section. If your kitchen has an island or other separate areas, be sure to measure and record those areas separately as well.
If you need further assistance or have any specific questions regarding your kitchen, feel free to call us!